plastic dustbin mould

plastic dustbin mould

Plastic dustbin mould series is one of quite wide plastic injeciton mould series, it not only contains industry dustin mould, commodity dustbin mould, but also in medical dustbin mould series, whatever it comes from, we have ability to produce this kind of plastic injection moulds, in the past 3 years, we have been taking over 50 sets dustbin mould orders each year from our EU, USA, Mid-East, African, South-American customers. We believe in the near futuer, Zhilian Mould will become a very honest dustbin moulds supplier for you. 

The features for AIC mould in plastic dustbin mould  filed:
1. Rich experience of design team: more than ten years of experience in dustbin mould design. Good dustbin mould can be designed according to your idea or pictures to meet your needs;
2. Automatic demoulding for all of our dustbin moulds: We got high praise from our clients abroad because of good shape and good quality dustbin mould;
3. Design the most reasonable runer system according to the part's function, by using cold runner, pin-point hot runenr system or valve gate hot runner system;
4. Competitive price mould: According to the mold life requirements and market positioning from clients to make the most competitive price of plastic dustbin mould;
5. After-sales Services: Provide spare parts free of charge within one year.
provide all-round technical solutions to any problems occurred in customers' mould operation lifelong maintains.

The dustbin mould can have a bright surface and then do film printing and other treatment, it will become a high-end dustbin products, but to make a good dustbin product is not Easy, first of all, to control the quality of the dustbin mold, including injection dustbin mold design, perfect dustbin mould assembly, hot runner and cold runner selection, and so on, vulgar. To be a professional expert, we need to know how to better control the problems Of garbage can mould. The main points are as follows:

I. plastic dustbin mould Assembly

Dustbin mould assembly is just like assembling machine. Every part and screw can't make mistakes. Otherwise, the consequences will be quite serious, which will lead to product defects, affect production, and completely damage the mould and cause scrap. So the mould assembly must be very delicate. During the assembly process, especially attention should be paid to the cleaning of the mould, especially the waterway and screw holes. The iron chips must be blown clean inside, otherwise It will be influence the mould a lot.

2. Hot runner or cold runner

In fact, this has the least impact on the quality of the dustbin mould, because hot runners are generally designated brands, especially some large customers. Because the quality and after-sales service of well-known foreign brands are in place, there will be no major quality problems. However, the quality of some domestic hot runner brands varies greatly. In order to save costs and strive for price advantages, some small enterprises use unreliable heating and transmission accessories, which are cause the  problems. The main problems of cold runner are how to ensure injection balance, gate size, injection pressure and so on.

3. Cooling water

We all know how important cooling is for a mould with experience in dustbin mold making. Because of the increase in special prices and wages, it is impossible to imagine the profits without reducing the attention cycle for a second when referring to the production of products. However, when the production cycle is accelerated, the temperature of the dustbin mould will rise. If it is not effectively controlled, the molds will be too hot to form, and even lead to mould deformation failure and scrap. Therefore, good waterway design is particularly important, including the distribution density, diameter, think of the previous links and so on.

IV: Maintenance of Dies and Moulds

Mould maintenance is mainly in the production process. molds are like automobiles. If they are not used and maintained for a long time, they may be scrapped. So every time the mould is used, it should be fully maintained, especially the rust-proof of the forming part and the rust-proof of the main moving parts. Because the mold needs water during the production process, it may fall asleep on the mold during installation or white disassembly, so we must ensure the dryness of the mold, and then brush a layer of oil protection.

AIC mould will always here to supply best mould service for you. welcome to contact us.